GPS Antenna Model AU-15

Features

• Antenna for GPS signal reception (L1 band)

  For timing applications and with high noise resistance, Multi-GNSS antenna AU-217 offers the best solution.
  Here's more on  Multi-GNSS antenna AU-217

• The antenna consists of the antenna for receiving GPS signal and the preamplifier for signal amplification.

• Power supply for preamplifier operation is supplied by overlapping the signal line.

• The antenna connector type consists of BNC, GT-5 and SMB.

• The antenna has an internal magnet so that it can be fixed on a metallic surface.

• Furuno Multi-GNSS/GPS Antenna Lineup

  Product Name	Applications	Supported Satellite Constellations		Note
  		GPS L1	GLONASS G1
  AU-217	For Fixed Position (Timing)	○	○	Ideal for use in location with intense electric field thanks to built-in noise filter. Highly noise resistant and highly environmental resistant equivalent to IP67.
  GPA-014		○	-	Ideal for use in location with frequent/heavy snowfall.
  AU-18	For Mobile	○	○	Available with a choice of antenna connector type.
  AU-15		○	-

Specifications

GENERAL

Input Frequency

1575.42MHz±1.023MHz

Polarization

R. H. C. P. (Right Hand Circular Polarization)

Antenna Gain

>= 2.0dBi (at 90° elev. angle)
>= -6.0dBi (at 10° elev. angle)

Output Impedance

50Ω

Total Gain

20±6dBi (AU-15-5B, AU-15-5G, AU-15-5S)
24±6dBi (AU-15-1.0B)

Pre. Amp Noise Figure

<= 2.3dB

VSWR

<= 2.0

Supply Voltage

5.0 ±0.5VDC

Power Consumption

<= 30mA

Operating Temperature

-30°C to +85°C

Storage Temperature

-40°C to +100°C

Operating Relative Humidity

<= 95%RH

Series Lineup (Connector, Cable)

AU-15-5B (BNC, 1.5DS×5m)
AU-15-1.0B (BNC, 1.5DS×1m)
AU-15-5G (GT-5, 1.5DS×5m)
AU-15-5S (SMB,1.5DS×5m)

Drawing

Contact

Locate a Distributor Contact a local distributor for further details.

* Specifications subject to change without notice.